89 cobra engine
11-11-2007, 12:29 PM
2nd Gear Member
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, Sask
Posts: 441
89 cobra engine
I can get my hands on 89 cobra engine but i dont know how much to offer him for it.What do you guys think?Its complete from oilpan to upper intake ,but also needs rebuilding.
11-11-2007, 12:37 PM
6th Gear Member
Join Date: May 2006
Location: earleville md
Posts: 10,357
RE: 89 cobra engine
89 cobra.... riiiiiggghhht.... give him 300 bucks, your buying a stock gt motor, unless it has the cobra ****...e ven so its not an 89
11-11-2007, 12:39 PM
2nd Gear Member
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, Sask
Posts: 441
RE: 89 cobra engine
? What you getting at there dimebag?
11-11-2007, 12:41 PM
6th Gear Member
Join Date: Jul 2006
Location: San Diego, CA
Posts: 6,882
RE: 89 cobra engine
there was no 89 cobra motor
11-11-2007, 12:44 PM
2nd Gear Member
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, Sask
Posts: 441
RE: 89 cobra engine
aaahhh. maybe he just put a cobra intake on it.If its a cobra engine what would the castings be on the heads?if Someone could tell me?Thanx
11-11-2007, 12:50 PM
2nd Gear Member
Join Date: Apr 2007
Posts: 353
RE: 89 cobra engine
im not sure what the casting number is but i know there should be three bars on the head near the freeze out plugs
11-11-2007, 12:55 PM
2nd Gear Member
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, Sask
Posts: 441
RE: 89 cobra engine
Thanx .is there anything else i should look for to tell?
11-11-2007, 02:27 PM
5th Gear Member
Join Date: Aug 2006
Location: Rotterdam, NY
Posts: 3,333
RE: 89 cobra engine
I wouldnt pay more than $200 for a junk stock motor.
11-11-2007, 02:32 PM
1st Gear Member
Join Date: Oct 2007
Posts: 74
RE: 89 cobra engine
yeah cobra was 93 an up
11-11-2007, 02:48 PM
2nd Gear Member
Thread Starter
Join Date: Aug 2006
Location: Saskatoon, Sask
Posts: 441
RE: 89 cobra engine
alrighty then .Thanx for the info guys.Im only going to offer him $125 and see what he says.if not i will go abit bit higher.Iwant a motor to rebuild anyways.Thanx