Ya i was worried for while cuz at 6 psi it only had just under 240 hp but still 320 torque, i got a steeda 19 and gt40x heads on it with some crane 1.7's, im curious to see what it will make in the spring if the trans holds up. The hp and torque curve is flat as a pancake.

 

Long rod 302, AFR 165's, Crane Hyd Roller cam, Weiand intake with a 570cfm carb, long tubes with dual 2.5", UDPs. 13.20's at 107 on street tires with a tune that was short on ignition timing and fuel(it's now running full timing with the proper jetting) and crappy 60's trying to fight off wheel hop.

 

306 gt40 cast irons, b303 cam, mac cai, 24#injectors, cobra intake, 65mm tb, msd6a, a9l ecu, custom h pipe catless, 40 series flows, udp's, 373's, superchips chip......dyno tune coming soonafter the paint job and some chassis stiffening

 

stock motor with fuel system and full exhaust

 

ima pretty happy with my nubers considering its an all stock engine im going to do my top end kit and crank pulley next year