price check.
12-06-2007, 08:18 PM
#3
4th Gear Member
Thread Starter
Join Date: Nov 2006
Location:
Posts: 1,185
RE: price check.
you really only feel that its worth 150, your craaazy broseph. <3. Ive seen them go on ebay for over 500. Ive got a chance to get one for around 350, maybe a little less, just wondering if ya think i should grab it or not to either use or resell.
Im wanting to do a cheap h/c/i this winter, maybe not the cam since the stock cam isnt to bad in the 91gt's but we will see.
Im wanting to do a cheap h/c/i this winter, maybe not the cam since the stock cam isnt to bad in the 91gt's but we will see.
12-06-2007, 08:24 PM
#4
6th Gear Member
Join Date: Jul 2006
Location: San Diego, CA
Posts: 6,882
12-06-2007, 08:45 PM
#6
4th Gear Member
Thread Starter
Join Date: Nov 2006
Location:
Posts: 1,185
RE: price check.
thanks for the info, and no its not the one from houston its actually on ebay, and im not longer interested in it. However i did find a gt40 lower that has been ported and an explorer upper thats kinda dirty but thats ok with bolts included. Said he would take 235 shipped bottom dollar, ive got a feeling i could get him to go a lil lower but not much.
Take a look at these for me if you would, i would really appreciate it.
upper
http://cgi.ebay.com/ebaymotors/explo...QQcmdZViewItem
ported lower
http://cgi.ebay.com/ebaymotors/gt-40...QQcmdZViewItem
he said that the regular stock gaskets work with the lower. I thought porting ment that you made the ports themselves bigger and would need a bigger gasket, maybe im wrong though, i dont know a whole lot on that subject really. he said that the inside is very smooth and not rough, and would add an additional 15hp or so compared to a regular gt40 lower.
He said with the upper/lower/fcam and a few other lil mods, he made a little over 310rwhp. This sound legit, he had full exhaust and underdrive pullies and electric fan.
Take a look at these for me if you would, i would really appreciate it.
upper
http://cgi.ebay.com/ebaymotors/explo...QQcmdZViewItem
ported lower
http://cgi.ebay.com/ebaymotors/gt-40...QQcmdZViewItem
he said that the regular stock gaskets work with the lower. I thought porting ment that you made the ports themselves bigger and would need a bigger gasket, maybe im wrong though, i dont know a whole lot on that subject really. he said that the inside is very smooth and not rough, and would add an additional 15hp or so compared to a regular gt40 lower.
He said with the upper/lower/fcam and a few other lil mods, he made a little over 310rwhp. This sound legit, he had full exhaust and underdrive pullies and electric fan.
12-06-2007, 11:02 PM
#7
5th Gear Member
Join Date: Nov 2004
Location: Texas
Posts: 3,834
RE: price check.
That price isn't bad at all. I sold my GT40 lower and Explorer upper seperately on ebay for 260 shipped in factory form. Honestly the tubular GT40 may look better, but there isn't much difference in flow/performance.
12-06-2007, 11:18 PM
#8
5th Gear Member
Join Date: Nov 2006
Location: North Fulton, GA
Posts: 2,287
RE: price check.
An Explorer upper/lower, elbow, fuel rail and injectors went on Ebay for $102. Although i already have one, I was going to buy it and resale it but I didn't realize I wasn't logged in when I went for the snipe. [:@]
http://cgi.ebay.com/ebaymotors/ws/eB...66563&rd=1
http://cgi.ebay.com/ebaymotors/ws/eB...66563&rd=1
