Last night i pulled the motor out of my car and got it on a engine stand. Tonight ill be pullin the motor out of my other car and puttin it in the car i pulled the motor out of last night. The car ill be pullin the motor from tonight is a 5 speed car and my other car thats gettin that motor is an auto. So basically im doin an aod to t5 swap and an engine swap all to the car i got the motor out of last night. I gotta get the pedals out of both cars tonight and im not sure how to do it. What parts of the dash do i need to remove to get to the pedal assemblies?

 

I didnt have to remove anything. Just the bolts holding the pedals in. Should only take about 15 - 20 minutes.

 

you'll have to drop the steering column down and I usually remove the drivers seat so I don't have to kink my neck......there are a few cross braces that'll need to be removed and about 6 to 8 bolts that hold the pedal assembly in place....also remove all the lower paneling by your knees....the last one I did was about a month ago and I was doing a heater core at the same time and even with the complete dash put is still took another 50 min to get it all out and new set back in

 

putting in the pedal assembly absolutely sucks [:'(] or at least thats how i stand. not a fun job