K-member is in
#1
K-member is in
1st I must give a big thanks to Mjr46 for taking the time out on a Sat to help me w/ this project. Took a lil longer than we had anticipated. But it's done. Thanks Mike!!!!
Sorry guys, no tech article for this one. We started around 1:00pm and finished up around midnight. That included the alignment. [:@] Once we started, there was no time for picture taking until we were done. Ran into a couple thing that a normal install wouldn't cause. Had to relocate my line lock and re run a couple brake lines. While we were in there, we replaces the rack bushigs and the motor mounts.
Not a great pic, but here is how it would look w/ the front end slammed.
W/ the ride height that low, the intercooler is about 2" off the ground
Here's the pile of old crap
Now the new stuff, gonna get some new pics when I have time. Didn't realize they were so lousy[:@]
Stil have a lil tweaking to do.
Thanks again Mike!!!
Have some clean up to do to and get some pics of the ride height. It's pretty much like it was before. Just can't run the car w/ the intercooler so low.
Sorry guys, no tech article for this one. We started around 1:00pm and finished up around midnight. That included the alignment. [:@] Once we started, there was no time for picture taking until we were done. Ran into a couple thing that a normal install wouldn't cause. Had to relocate my line lock and re run a couple brake lines. While we were in there, we replaces the rack bushigs and the motor mounts.
Not a great pic, but here is how it would look w/ the front end slammed.
W/ the ride height that low, the intercooler is about 2" off the ground
Here's the pile of old crap
Now the new stuff, gonna get some new pics when I have time. Didn't realize they were so lousy[:@]
Stil have a lil tweaking to do.
Thanks again Mike!!!
Have some clean up to do to and get some pics of the ride height. It's pretty much like it was before. Just can't run the car w/ the intercooler so low.
#6
RE: K-member is in
ORIGINAL: PRO50SC
Sorry guys, no tech article for this one.
Sorry guys, no tech article for this one.
I will work up a tech artcl/sticky sometime this week. It will re-use stock suspension
so wont cover coilover install.
#9
RE: K-member is in
Looks good Bernie!!.....pics look clear to me!!! I like the first pic!!hmmmmm who's that dirty hogg off to the right of the pic??looks like he was rollin' in the pigs trough[sm=icon_rofl.gif]oh wait that's me!! anyway.. we'll get it tweaked right!! helps if I had of read step #5 on the coil over instruction sheet[:@]......but yeah it was a long day!!! pizza was good though!!