MustangForums.com

5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

sheet metal door panels

Thread Tools
 
Search this Thread
 
Old May 11, 2008 | 02:54 PM
Share
  #1  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default sheet metal door panels
has anyone ever made there own? any tips or a link to a write up someone has done??

i am going to put my manual on my coupe here soon and though that would be something else i can do to lighten them some
Reply
Old May 12, 2008 | 12:17 AM
Share
  #2  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default RE: sheet metal door panels
come on guys
Reply
Old May 12, 2008 | 12:41 AM
Share
  #3  
primetime5.0's Avatar
primetime5.0
6th Gear Member
 
Joined: Dec 2003
Posts: 9,587
From: United States
Default RE: sheet metal door panels
just buy the wolfe stuff
Reply
Old May 12, 2008 | 12:48 AM
Share
  #4  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default RE: sheet metal door panels
for 200??
Reply
Old May 12, 2008 | 04:05 AM
Share
  #5  
primetime5.0's Avatar
primetime5.0
6th Gear Member
 
Joined: Dec 2003
Posts: 9,587
From: United States
Default RE: sheet metal door panels
sometimes its just easier and better to buy a product instead of making it
Reply
Old May 16, 2008 | 09:25 AM
Share
  #6  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default RE: sheet metal door panels
this is for the pair correct? http://www.wolferacecraft.com/detail.aspx?ID=298
Reply
Old May 16, 2008 | 09:45 AM
Share
  #7  
disturbed471985's Avatar
disturbed471985
4th Gear Member
 
Joined: Jul 2006
Posts: 1,124
From:
Default RE: sheet metal door panels
^^ yes for pair but the one we ordered from them for a camaro still required some minor trimming just a heads up.
Reply
Old May 16, 2008 | 03:30 PM
Share
  #8  
bbbngowc's Avatar
bbbngowc
3rd Gear Member
 
Joined: Mar 2007
Posts: 787
From:
Default RE: sheet metal door panels
[:'(]
Reply
Old May 16, 2008 | 04:03 PM
Share
  #9  
hi_tek_rednek's Avatar
hi_tek_rednek
2nd Gear Member
 
Joined: Apr 2008
Posts: 192
From: Mousewitz,FL
Default RE: sheet metal door panels
i'm gonna make my own. i work in aluminum. so it wont be that hard. might not be as polished those but it isn't going to cost $200 either.




will...
Reply
Old May 16, 2008 | 11:15 PM
Share
  #10  
w8less's Avatar
w8less
Thread Starter
6th Gear Member
 
Joined: Feb 2005
Posts: 13,396
From: KY
Default RE: sheet metal door panels
i wouldnt pay that. i was going to try and make my own as well
Reply



Advanced Search
Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 11:51 PM.