5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Power Estimate

Thread Tools
 
Search this Thread
 
Old Dec 1, 2008 | 10:27 PM
  #1  
flowmastamatt's Avatar
flowmastamatt
Thread Starter
 
Joined: Sep 2008
Posts: 25
From: none
Default Power Estimate

Hey guys whatsup? I'm new to the mustang world coming over from a 94 Z28. But anyways I'm looking at a 94 gt with a h/c/i package and I wanted to know what you guys think about it. How much power it would make at the wheels? And what it would run in the 1/4 with an average driver. Here is the list of mods done to it
Y302 svo aluminum heads (according to him the same as gt40's but a little better) w/ crane 1.72 roller rockers, upgraded springs w/ Ford Racing M-6051-A50 high performance engine gaskets kit
cobra intake upper and lower w/ Ford Racing M-9439-A50 Gaskets
bbk 70mm throttlebody
steeda 19 cam /w ford racing timing chain, and a pro race balancer.
msd coil
egr delete
smog delete
a/c delete
spec stage 1 clutch
flowmaster 40 exhaust
ORX
ford racing shorty headers
eibach pro kit lowering springs
manaul fan switch
bbk short shifter
cobra svt wheels
New 02 sensors, ngk spark plugs, new plug wires, msd cap and rotor, new water pump and timing chain gaskets.

Last edited by flowmastamatt; Dec 2, 2008 at 08:06 AM.
Old Dec 1, 2008 | 10:49 PM
  #2  
ctgreddy's Avatar
ctgreddy
6th Gear Member
 
Joined: May 2007
Posts: 6,277
From: Dearborn, MI
Default

if its got a full exhaust prolly around 270 at the wheels. with good tires and a good launch prolly mid to high 12's. depending on what gears it has is also a huge factor.
Old Dec 2, 2008 | 01:17 AM
  #3  
luckythirteen13's Avatar
luckythirteen13
6th Gear Member
 
Joined: May 2004
Posts: 9,092
From: las vegas, nv
Default

i would say anywhere between 260-280rwhp depending on who tunes it. if its not tuned and they guy just bolted all those parts on and called it a day then maybe even less
Old Dec 2, 2008 | 07:08 AM
  #4  
mjr46's Avatar
mjr46
D.R. THE PATHETIC DORK
 
Joined: Jun 2007
Posts: 30,869
From: West Virginia
Default

PLEASE READ this before future posts!
https://mustangforums.com/forum/5-0-...ease-read.html
Old Dec 2, 2008 | 08:07 AM
  #5  
flowmastamatt's Avatar
flowmastamatt
Thread Starter
 
Joined: Sep 2008
Posts: 25
From: none
Default

sorry I didn't read the rules. So about 270 is a safe bet? And what do you think it would run in the 1/4?
Old Dec 2, 2008 | 10:54 AM
  #6  
FivePointOhh's Avatar
FivePointOhh
in limbo
 
Joined: Jan 2007
Posts: 7,300
From: Iowa
Default

depends on the suspension set up and gears which sounds like its all stock. maybe mid 13's with a high mph trap speed. get some suspension and gears on that thing!
Old Dec 2, 2008 | 06:32 PM
  #7  
flowmastamatt's Avatar
flowmastamatt
Thread Starter
 
Joined: Sep 2008
Posts: 25
From: none
Default

id plan on putting on some gears and probably drag radials. what do you think I would run after that?
Old Dec 2, 2008 | 06:50 PM
  #8  
NoGo95GT's Avatar
NoGo95GT
4th Gear Member
 
Joined: Aug 2007
Posts: 1,788
From: Texas
Default

Considering those mods I would guess it would run a 13.8-14.0@101 in 1/4. However, that is if the car has stock gears. However, if he installed all those mods, I willing to bet the stang has lower gears. With drag radials and the gears the car would probably run a mid-low 13@103.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jrrhd73must
Classic Mustang General Discussion
2
Oct 2, 2015 09:17 PM
KingRando
2005-2014 Mustangs
5
Oct 2, 2015 08:06 AM
ChampInSD
5.0L GT S550 Tech
13
Oct 2, 2015 04:55 AM
MustangForums Editor
General Tech
0
Sep 25, 2015 06:58 PM




All times are GMT -5. The time now is 12:57 AM.