got the car running!
#1
got the car running!
Ok so i have been trying to put a novi 2000 on my mustang since the beginning of january, and due to school and constantly being sick this last month its taken me some time,
Good news is i finally got the car to run decently,
Now i have a question for you supercharger guys, do you leave the pipe running from the oil filler on the valve cover to the throttle body connected?
Good news is i finally got the car to run decently,
Now i have a question for you supercharger guys, do you leave the pipe running from the oil filler on the valve cover to the throttle body connected?
#2
and you have no videos???
disconnect the line going from the tb to the valve cover. if you leave it connected boost air will go through it into the crank case and cause oil leaks out the rear main. cap off the tb but leave the hole on the valve cover open if you still have the pcv hooked up
disconnect the line going from the tb to the valve cover. if you leave it connected boost air will go through it into the crank case and cause oil leaks out the rear main. cap off the tb but leave the hole on the valve cover open if you still have the pcv hooked up
#5
ok that makes sense thanks guys,
Ya pro thats what paxton has in their instructions, its just that im not using that cover so i wasnt sure what to do with the line
Videos are coming eventually, ill try and get some photos of everything up too
Ya pro thats what paxton has in their instructions, its just that im not using that cover so i wasnt sure what to do with the line
Videos are coming eventually, ill try and get some photos of everything up too
Thread
Thread Starter
Forum
Replies
Last Post
92 5.0stang
5.0L (1979-1995) Mustang
4
08-13-2015 06:46 AM
Milan Dragway
Members Rides and Car Show Section
0
08-12-2015 03:43 PM