MustangForums.com

5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Project 306

Thread Tools
 
Search this Thread
 
Old 10-22-2009, 12:22 PM
  #1  
Jdizzel
Thread Starter
 
Jdizzel's Avatar
 
Join Date: Sep 2009
Location: Missouri
Posts: 18
Default Project 306
Got my block back from the machine shop yesterday, after nearly two weeks of waiting.
[IMG][/IMG]
And about two hours later I called it a day. Went with an Eagle crank (stock stroke), forged Scat rods, .030 over forged Speed Pro pistons, billet main girdle and a windage tray.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Next up is a X303 cam, set of custom 185 heads w/ 1.6 roller rockers, topped with a RPM Air Gap Intake. Will post up updated pictures soon!
Last edited by Jdizzel; 10-22-2009 at 04:51 PM.
Jdizzel is offline  
Reply
Old 10-22-2009, 01:51 PM
  #2  
F150 StrokerCobra
2nd Gear Member
 
F150 StrokerCobra's Avatar
 
Join Date: Sep 2008
Location: Oranjestad, Aruba
Posts: 220
Default
nice combo...!
F150 StrokerCobra is offline  
Reply
Old 10-22-2009, 03:19 PM
  #3  
Jdizzel
Thread Starter
 
Jdizzel's Avatar
 
Join Date: Sep 2009
Location: Missouri
Posts: 18
Default
Yeah, now I just need to start looking for a decent car to put it in.
Jdizzel is offline  
Reply
Old 10-22-2009, 04:42 PM
  #4  
tohoopty
4th Gear Member
 
tohoopty's Avatar
 
Join Date: Sep 2008
Location: point pleasant,west virginia
Posts: 1,212
Default
you can put it in my car
tohoopty is offline  
Reply
Old 10-22-2009, 04:54 PM
  #5  
Jdizzel
Thread Starter
 
Jdizzel's Avatar
 
Join Date: Sep 2009
Location: Missouri
Posts: 18
Default
I'm sure I could I'm actually gonna be looking for a 87-93 hatch GT or LX. I'm not too concerned with the condition of the car, as long as it is set up for standard transmission, and doesn't need alot of body parts replaced.
Jdizzel is offline  
Reply
Old 10-22-2009, 04:58 PM
  #6  
motorman524
MF Informant
 
motorman524's Avatar
 
Join Date: Sep 2006
Location: Missouri
Posts: 2,690
Default
What area of Missouri are you from man? I'm from the Columbia/Mexico area.
motorman524 is offline  
Reply
Old 10-22-2009, 04:58 PM
  #7  
Jdizzel
Thread Starter
 
Jdizzel's Avatar
 
Join Date: Sep 2009
Location: Missouri
Posts: 18
Default
Republic/Springfield
Jdizzel is offline  
Reply
Old 10-22-2009, 05:13 PM
  #8  
motorman524
MF Informant
 
motorman524's Avatar
 
Join Date: Sep 2006
Location: Missouri
Posts: 2,690
Default
Nice, my best friend of like 15 years is going to school at Ozark Tech.

Me and you have almost the came exact bottom end accept for our cranks. Mine is from a mountaineer but I am running those same sealed power pistons and forged rods.
motorman524 is offline  
Reply
Old 10-22-2009, 05:20 PM
  #9  
Jdizzel
Thread Starter
 
Jdizzel's Avatar
 
Join Date: Sep 2009
Location: Missouri
Posts: 18
Default
Originally Posted by motorman524
Nice, my best friend of like 15 years is going to school at Ozark Tech.

Me and you have almost the came exact bottom end accept for our cranks. Mine is from a mountaineer but I am running those same sealed power pistons and forged rods.
What kind of cam/heads are you running? Fuel injected?
Jdizzel is offline  
Reply
Old 10-22-2009, 05:23 PM
  #10  
motorman524
MF Informant
 
motorman524's Avatar
 
Join Date: Sep 2006
Location: Missouri
Posts: 2,690
Default
It is fuel injection. I am running GT40p heads with an e303 camshaft.
motorman524 is offline  
Reply



Advanced Search
Quick Reply: Project 306


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 07:52 AM.