Hi all, asking for help. I have searched forum after forum. I am trying to find a cam that will work for my application. I have been strongly considering the B303 or F303 cam. Do you think these cams will work with the following engine/computer setup? Will the stock computer work? Any help is GREATLY APPRECIATED!!!

1994 Mustang GT Fuel injected 302
GT-40 iron heads
65 mm throttle body
Cobra intake
1.7 roller rockers
Short tube headers w/ side exhaust

 

Tfs stage 1. Stock ecm will be fine.

 

And the intended use is?

 

Intended use, more power, rough idle. Any idea what the Explorer heads (gt-40's) valve springs are rated to? Thanks

 

hah, like mid .400 lift i think maybe less. i have gt-40 irons from an explorer with an e303 and 1.7rr and get valve float at about 5800rpm