When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
been a while!! anyone installed a fr1508 rack from flaming river?, justy need to know if and where i need to cut at my stock shaft. working on 94 gt. thanks any help would be appreciated!!!
I installed a Flaming River rack several years ago, don't remember the part# and can't get to my paperwork. As I remember it I never had to cut anything, juat drill 4 'dimples' on the factory shaft.....
i would suggest getting the flaming river steering shaft as the rubber rag joint on the stock shaft will have a high probability of failure after all the manual steering
rack install
