5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Found some ford performance

Thread Tools
 
Search this Thread
 
Old Mar 18, 2015 | 05:45 PM
  #1  
95gtconvert's Avatar
95gtconvert
Thread Starter
2nd Gear Member
 
Joined: Jun 2014
Posts: 188
From: Wisconsin
Default Found some ford performance

http://northernwi.craigslist.org/cto/4922351052.html

this poor thing needs a little body work but I'm afraid there's more structural issues seeing the bumper and box

any input?
Old Mar 18, 2015 | 06:10 PM
  #2  
CPTCO's Avatar
CPTCO
5th Gear Member
 
Joined: Apr 2012
Posts: 2,793
From: Colorado
Default

3500 for a pickup, ANY pickup, is pretty cheap. On one hand that kind of worries me, on the other hand, it's 3500 bucks, can't hurt you too bad.
If it was in my neighborhood I'd take a look. Boxes can be replaced pretty easy, and the whole thing needs paint, so take that into consideration.
Old Mar 18, 2015 | 06:28 PM
  #3  
95gtconvert's Avatar
95gtconvert
Thread Starter
2nd Gear Member
 
Joined: Jun 2014
Posts: 188
From: Wisconsin
Default

looking at it and the fact that it's a lightning that cheap worries me a bit but at the same time it's a $3500 lightning I just don't want to take my time (and gas) to find out there's more underlying problems
Old Mar 18, 2015 | 06:49 PM
  #4  
95gtconvert's Avatar
95gtconvert
Thread Starter
2nd Gear Member
 
Joined: Jun 2014
Posts: 188
From: Wisconsin
Default

http://www.kbb.com/ford/f150-regular...dcondition=all

I guess first gen lightning's are pretty freaking cheap
Old Mar 18, 2015 | 07:10 PM
  #5  
CPTCO's Avatar
CPTCO
5th Gear Member
 
Joined: Apr 2012
Posts: 2,793
From: Colorado
Default

You can be sure at $3500, there are going to be issues. Heck, Ive seen guys pay that much for something to haul grass clippings from the yard in.
Old Mar 18, 2015 | 07:18 PM
  #6  
95gtconvert's Avatar
95gtconvert
Thread Starter
2nd Gear Member
 
Joined: Jun 2014
Posts: 188
From: Wisconsin
Default

that's true

I paid $2500 for a truck before that needed head gaskets a month later lol I just don't want another basket case like that was becoming or like my vert was
Old Mar 18, 2015 | 09:04 PM
  #7  
mjr46's Avatar
mjr46
D.R. THE PATHETIC DORK
 
Joined: Jun 2007
Posts: 30,871
From: West Virginia
Default

lol....one new front rotor......if someone is to cheap to do 2 rotors and do the brake job right, you can bet your bottom dollar they've half azzed a lot more stuff on the truck, run and run fast!!!
Old Mar 18, 2015 | 09:32 PM
  #8  
95gtconvert's Avatar
95gtconvert
Thread Starter
2nd Gear Member
 
Joined: Jun 2014
Posts: 188
From: Wisconsin
Default

working at a parts store I always try to tell people not to half ash their brakes some listen and I even had someone yell at me for trying to just simply keep them safe on the road
Old Mar 19, 2015 | 03:51 AM
  #9  
bluebeastsrt's Avatar
bluebeastsrt
6th Gear Member
 
Joined: Jun 2006
Posts: 11,565
From: Jersey
Default

I don't see the harm in going to look. Take someone that knows mechanical stuff with you and take it for a long test drive. I recently bought a 91 F150 4X4 to haul the race car for 2 grand. It needed brakes and it'll need ball joints but everything worked on it down to the cig liter. And a lot of the stuff is cheap to fix if you do it yourself. Once in a great while you'll get lucky and find a good deal.

Last edited by bluebeastsrt; Mar 19, 2015 at 03:54 AM.
Old Mar 22, 2015 | 06:56 PM
  #10  
95gtconvert's Avatar
95gtconvert
Thread Starter
2nd Gear Member
 
Joined: Jun 2014
Posts: 188
From: Wisconsin
Default

I know the things to look for... might go take a look and bring a jack just to check the front end just in case he doesn't want to bring his out lol



All times are GMT -5. The time now is 08:36 PM.