I bought an SCT Xcal3 about a year ago with a custom tune for my bolt-ons and 93 octane fuel.

I'm wondering, using the SCT can I see what tuning params are on the stock tune? And what tuning params are on the custom tune?

I'd like to start tweaking things and I want to start by gathering the data.

 

I don't believe there is a way to see that on the customer end without a PRP setup. The way the adjustments work is they add or subtract on top of the tune you are using. So for example, changing Spark from 0 to +2 on the stock tune might result in +12, and changing Spark from 0 to +2 on the custom tune might result in +20. As far as I know though, there is not a way to see the actual starting value of the tune on the handheld.

-Nick

 

You can't look at the tune to see what was changed, but you could datalog to see what your car is doing and adjust from there.

Live Link Data Logging Software
Application: X3 / SF3 Enhanced Flash Devices
Current Version:4.41 Click Here to Download

This version is recommended for Xcalibrator 2, X3, X3Enhanced, and Livewire devices. Please note if version 4.30 was installed, you must uninstall this version prior to install.

After installing this version, please run the database update below.
The Database update adds support for 2008 and early 2009 vehicles. (12/2/2008 release)

Database update here:
http://www.SCTflash.com/SCTFiles/Liv...ase_Update.exe
Notes:
- Live Link 4.41 is both Windows XP & Windows 32 bit Vista Compatible

Livelink FAQs

Livelink Demo