OK so my mach 460 6 disc changer is junk if it cant play CDs or receive ipod.

any suggestions on what to replace it with or what guide lines. I know this has been asked a dozen times but also their are new answers since new model units have come out.

 

OK i see people talking about radio and CD player separately.... its my understanding all i will have to do is plug my antenna into the back of the new cd player I buy and I will eb good to go.


and i am also reading I will have to rewire my speakers because of the Ohms....

 

http://www.pioneerelectronics.com/PU...vers/FH-X700BT

 

also I got one of these today for basically free.... and a crappy amp


http://store.sony.com/p/XS-L126P5/en/p/XSL126P5

 

This section is so dead....


SO I am guessing I need an adaptor so the Mach amps arent hit to hard with the Pioneer's high watts...

also I dont understand the different in an AUX out and RCA audio outs

 

no sticky on the site... google search just seems to have people asking the same question as me.


when i get all this figured out i will make a tutorial or sticky worthy thread



EDIT:

getting warmer....

http://www.parts-express.com/pe/psho...number=265-790


and http://www.crutchfield.com/p_105KWHD...4#overview-tab




EDIT: ok so the RCA jacks are PRE AMP outputs and the adapter uses them to send the signal to the 460 amps.

Now I need a CD player with 3 so I can use a sub. HMMM



EDIT: I dont know if i trust crutchfield. they have the same adaptor but idk why it only has one RCA input on that adaptor, shouldnt it have two? L and R ? with one id have to bridge it


also looking at this!

http://www.crutchfield.com/p_105KWR5....hatml?tp=5684

 

bought a kenwood double din with the sub output, it was that or one without it but had HD radio, I dont listen to the radio so I went with the Kenwood.


pics and installation tutorial coming soon !!!