got the DDM H7 kit for our Raxiom lights

we got no directions

everything is connected, but no lights
the high beams work but no low beams (what we bought)

tried swapping the polarity on the ballast - but still nothing

1. the lead with the fuse is connected to the red post on the battery
2. the lead without the fuse is grounded where the battery grounds on the chassis
3. headlights are drilled and wired with spade connectors with HID bulbs mounted
4. relay is setup to distribute to the ballasts
5. ballasts are wired to the headlights (tried switching polarity)
6. factory headlight connectors are connected

the only thing we haven't connected are the side marker plugs, but do we need to?

 

another question - there's only 1 ground wire, shouldn't there be one per ballast?

 

omg - so both our low-beam fuses were blown



all good now! AWESOME!