I've been thinking of doing a lot of things with my car this year...

i want to get black 03/04 cobra wheels, rear blackout, etc. i was wondering if somebody could help me out with one or two of the chops i wanna see..

first i want to see these black wheels on my car. if you could, keep the calipers red please and take out some wheel gap in the back (maybe just a LITTLE bit bc a wider tire will make it look like there is less gap bc it will be flush with the fender)





than, i was thinking about making the roof of my car black (just the roof. not the C pillars) and than the hood of my car where it starts to cowl, black (following the lines of the hood)

like this car





and lastly, i was wondering if somebody could give me a black spoiler, black in between the tails on the decklid, and black higher up on the rear valence to fill out that bottom line so that i could see how it would look

like this car




than if you guys are bored... id love to see how my car would look with the whole top half black from the pillars up (like this car)




I REALIZE THIS IS A LOT OF CHOPS AND IM SORRY. thats why i capitalized that sentence =P anything you guys do i would GREATLY appreciate.. thanks guys

 

I'll do what I can later this afternoon/evening.

 

thanks boostin.

 

oh man. sorry to annoy you guys when you get around to this... i really think i want a chrome lip.. such as black bullits with a chrome lip... i'd love chops of both the bullits and the cobras though...

here are the bullits. im really sorry. im just so unsure.. hopefully one of those pictures is good enough.. different angles. i tried to get a pic with the same angle for you guys. try to keep calipers red!! and again, try to remove a LITTLE bit of wheel gap please!!

 

Oh crap. I totally forgot about this...took some new pics of mine and got distracted. I'll start on some of it soon here.

 

Ok, this color changing business is a huge PITA. Mine keep looking fubar'd. I can do rims just fine though.

Tips Joo/AR/anyonegood????

 

yeah, color changing can be kinda hard. try (assuming you're using photoshop) removing the color first, then blacken using hue/saturation or brightness/contrast (you can get two different looks if you change lightness (in hue) vs. brightness), then go to brightness/contrast and adjust the contrast (sliding the bar left makes a more 'flat color', and sliding it right should make it 'glossy')

 

for the most part. i really wanna see both sets of wheels.. the colors, i just need an idea.. im sure w/e u do will be greattt =)

 

here's my rendition of black bullitts and the black 'cowl', roof, and spoiler; it's 'lowered' too. also, i can personally say, blackouts look good on a new edge

 

anyway that you can gloss up the wheels more and put a deep dish out back?

its so hard to decide.. once you paint, you cant really go back. at least not with laser red