volare71

After researching the available kits on the internet, we purchased the Leed Brake Kit we purchased the:

Manual Front Disc Brake Conversion 64.5-66 Ford - 4 Piston SKU: FC0001-405

It was an easy installation, but we opted for our own Master Cylinder lines to the original distribution block for the front brakes and proportioning valve for the rear brakes. The kit was complete and fit well. It was easy to bleed the brakes after the installation and after dialing in the proportioning valve we had a really good manual front disc rear drum setup We did not need power discs, but put on new KYB gas adjust (performance) shocks and 17X7" American racing wheels with 205 45 17 front and 225 45 17 rear BFG G-Force Comp AS tires.
What a change in handling. our next step is a 1" front and 3/4" rear anti-roll bar and Monte Carlo bar.
I would recommend this kit to anyone.