Would you be able to run that same setup but with some stock heads and tell me what you come up with?? I cant afford aluminum heads but i may use that same cam.

 

thanks dude...here's the cam .553 in. .536 ex.. 229/239....hydraulic at 112. that's the new one.

and compression is 10.1 now also.. sorry. everything else is still the same on sheets,.

 

What's the Comp cam number?

 

it's not it's a custom cam by jay allen...need more info?

 

Here is the dyno sheets from the sheets you posted without the new cam you listed.





[IMG]local://upfiles/26659/C12AE63377294977BC092865A935064A.jpg[/IMG]

[IMG]local://upfiles/26659/CFE20E935F42475B8C815C78CED0C9EE.jpg[/IMG]

 

it says .510 lift...

 

That's as close as I can get because the Dyno will not let me enter custom specs, only select from cam files to load in.

 

i just did it...damn it's time consuming...

 

Did it allow you to input a custom cam and not one of the cam files?

 

yes i went custom and typed it in.i even put the ivo/evo in also.