i dont know what the technical term is, the area behind the door and in front of the rear wheel. if they make replacement area's for this, PLEase. someone direct me in the right direction, i cant seem to find one.

im trying to host a photo but photobucket seems to be down right now.

 

[sm=ttiwwp.gif] if a error message comes up on photo bucket, right click and click " refresh " it will work after taht.

 

are you talking about one of these?

link

edit:
oopps wrong year, not sure if they make one for a 69. sorry.

 

are you talking about the door post, pillar, quarter panel, panels? maybe post a pic

 

i tried the refresh button before and nothing, im not computer illiterate ftw.

351foxstang, that is what im talking about, something like that

 

i circled the area in question.



NOTE: this is an old pic

 

yikes...

 

i already cut the area out, i just Really dont want to fabricate the edge of the wheel well.

 

It would be very easy to fabricate. You don't have to do it with one piece of sheetmetal. Put your wire feed to use. Make sure you have a peanut grinder as well.

 

its just the area where it starts to lift up to the edge of the wheel well, that will look like total sht if i do it wrong, and thats what im afraid of.