When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cause thats a stupid way to do it.... Just use a wooden block some 100MPH tape and a dead blow or a thick rubber mallot... Put the 100mph tape on the outside of the fender. take the block of wood and place it on the opposite side your striking with the hammer and just do a little at a time. The wood obsorbs most of the blow and redused the possibility of cracking the paint or warping the acctual body conture of the fender.....