Hinges Hell
my door hinges are pretty devastated. both doors sag real bad even after i rebuilt them...i saw this guy who rebuilds them for $120 or something....
http://www.mustangsteve.com/hinge.html
is that a better route to go as opposed to buy new hinges....?
http://cgi.ebay.com/ebaymotors/ws/eB...112&rd=1,1
http://www.mustangsteve.com/hinge.html
is that a better route to go as opposed to buy new hinges....?
http://cgi.ebay.com/ebaymotors/ws/eB...112&rd=1,1
I had a bad hinge and tried to rebuild. Because the pin had broke at some point and was rusted in, it was going to be very difficult to get that middle section out. I bought a new one from CJ's Pony Parts and the thing was excellent quality.
I wasted my money on the new pins and should have just replaced it in the beginning.
I wasted my money on the new pins and should have just replaced it in the beginning.
ORIGINAL: andrewmp6
id rebuild the ones you have or send them to mustangsteve if the repoped ones are anything like sheet metal they might not fit.btw did you get your trunk fitted
id rebuild the ones you have or send them to mustangsteve if the repoped ones are anything like sheet metal they might not fit.btw did you get your trunk fitted
my trunk fitted? do you mean all my fiberglass stuff??
ORIGINAL: Niteshade
I had a bad hinge and tried to rebuild. Because the pin had broke at some point and was rusted in, it was going to be very difficult to get that middle section out. I bought a new one from CJ's Pony Parts and the thing was excellent quality.
I wasted my money on the new pins and should have just replaced it in the beginning.
I had a bad hinge and tried to rebuild. Because the pin had broke at some point and was rusted in, it was going to be very difficult to get that middle section out. I bought a new one from CJ's Pony Parts and the thing was excellent quality.
I wasted my money on the new pins and should have just replaced it in the beginning.
You poor guy. I had my house 'tented' lastyear and it was$1836, about a buck a square foot. That's in Northern California. Now my cousin's house in Tyler ison a slab and it cost her $2200 to dill into the slab and gas them.
Jim
Jim
I got rid of two sheds, my spa, the fence around it and have a gate left to replace. It cuts into my Mustang stuff.The inspector gave me a clean bill of health and I got some good stuff from Home Depot to spray around the house, keeping with the 'do it to myself' theme. It's got a five year killing life. Humm, two applications equals ten years?
Jim
Jim
go along with nite shade,,, mine were busted off,, had to replace'em,,,, on a budget big time!! but there comes a time and circ's that ya gott'a say replace the whole thing and trust me I'm the bad day mustang guy,, and I do everything possible that me and or my friends can help me with to save money... the one thing that keeps me going on deals like this is that I ( sometimes with help ) did it my self!!!!!! and saved a small pile of dough my self


