Clicking on the 302 Engine
I had the video eariler, and I went through and did the guide about tightening all the rockers. However, After doing that, it still is there. (the sound clicking). I did unplug each spark plug and started the car, and I found the click went away when the Number 7 piston spark plug was unpluged. ( Engine sounded good and kinda smooth). So, since I found were the noise is comming from. What is the next logical thing to do?
FYI, When i am driving it and it heats up, the noise is bariely there. and sometimes, I do not even hear the click when Its been warm for awhile at idle. But it does sometimes, when I rev it up, you do hear it.
Any suggestions! Thanks!!!
FYI, When i am driving it and it heats up, the noise is bariely there. and sometimes, I do not even hear the click when Its been warm for awhile at idle. But it does sometimes, when I rev it up, you do hear it.
Any suggestions! Thanks!!!
Thread
Thread Starter
Forum
Replies
Last Post
AMAlexLazarus
AmericanMuscle.com
21
Apr 4, 2020 02:16 PM
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
Sep 9, 2015 01:21 AM




