Stalling 302
Iown a 70 Fastback and I'm having a problem with it stalling at idle when she’s hot. She'll run nice all day driving around town, (Moncton, NewBrunswick, Canada) but when I come offthe highway and she’saround 200º, as Iapply the brakesto stop she'll stall. I've tried playing with the carb, (presently a 2300 Fordcarb) but nothing changes. I've done a little work tothe engine, mild cam, Pertronix distributor & coil, headers, .030 over. I though that she was running hot at 200º/210º but from what I read on other threads, this isa good operating temp for this engine, by the way it's a 302 with a 4 speed top loader.
Any suggestions on why it's stalling? What should I be looking for?
Thanks.
Any suggestions on why it's stalling? What should I be looking for?
Thanks.
That's happened to my 289 a few times...stop at a light..all warmed up at about 200, and she'll just die
similar mods..mild cam, headers, .030 over, and a few other minors
i'm pretty sure my problem was my battery was being drained so my sparks were poo and she'd choke after so long
similar mods..mild cam, headers, .030 over, and a few other minors
i'm pretty sure my problem was my battery was being drained so my sparks were poo and she'd choke after so long
I had a similar problem with my grand prix and it drove me insane [&:]. With the engine idling, start pulling plugs until you find the "fouled" plug and change it. Thankfully, that was my culprit.
Good Luck!
-Hawkins
Good Luck!
-Hawkins
Thread
Thread Starter
Forum
Replies
Last Post
bradleyb
Classic Mustangs (Tech)
3
Nov 27, 2015 07:50 PM



