OK, so I just clarification, What would be needed for a complete engine build?

[ul][*] Block with rotating assembly (crankshaft, connecting rods, pistons)[*] assembled cylinder heads (valves, valve springs, rocker arms, pushrods)[*] Camshaft[*] Timing Chain[*] Oil Pump[*] Oil Pan[*] Intake Manifold[*] Carb[*] Timing Cover[*] Alternator[*] Belt(s)[*] Water Pump[*] Throttle Linkage[*] gaskets[*] fuel pump
[/ul]

Can anyone think of anything else i would need. Oh and btw its a 351W if that makes much of a difference.

 

Distributor assembly

 

Anyone have suggestions as to a good distributor setup?

 

lifters,oil pick-up, oil pump drive shaft, harmonic balancer, flexplate or flywheel assuming the rotating assembly includes bearings and rings, the heads include retainers and locks, the timing chain inclides both cam and crank gears, and I'm sure I forgot a ton of stuff.

 

paint, new battery cables, thermostat and housing, water hoses, motor mounts, oil filter and oil, sending units, etc..

 

rings and bearings?


and beer!

 

I will second the beer!

Assembly lube.

 

valve covers

 

ya i like the idea of "and beer" too bad im 16- but no one has to know eh? lol

 

Im under 21 and still add the "and some beer" to my projects.