67 Coupe Update - :(
5th Gear Member
Joined: Sep 2005
Posts: 2,505
From: Wasilla, Alaska
RE: 67 Coupe Update - :(
[align=left]If you open the door and look inside above the top hinge there is another 9/16 bolt. You will need a long extension.
ORIGINAL: 67mustang! newtothis
[/align]
i have the same thing on my 67 coupe, except for mines on the quarter panels, and front floor pans. also you guys might be able to help, i am unable to get my fenders off. i have pulled all the bolts that i can find. yes even the ones by the lights. i have the manual an d have read it and stuff, but i just cant figure it out. if you guys have some suggestions i would greatlly appreicate it.
[/align]
i have the same thing on my 67 coupe, except for mines on the quarter panels, and front floor pans. also you guys might be able to help, i am unable to get my fenders off. i have pulled all the bolts that i can find. yes even the ones by the lights. i have the manual an d have read it and stuff, but i just cant figure it out. if you guys have some suggestions i would greatlly appreicate it.
5th Gear Member
Joined: Jan 2007
Posts: 2,166
From: Oregon
RE: 67 Coupe Update - :(
Wow! That's terrible, good luck with fixing that.
Newtothis: When I took the fenders off my '65 I believe there was also a bolt that I could only get tothrough the kick panel, can't remember what size it is, probably 9/16.
Newtothis: When I took the fenders off my '65 I believe there was also a bolt that I could only get tothrough the kick panel, can't remember what size it is, probably 9/16.
Thread Starter
3rd Gear Member
Joined: Oct 2007
Posts: 671
From: Florida
RE: 67 Coupe Update - :(
well, i got the 2 floor pan pieces in the front on the passenger side. gotta get the frame rail support on so i can bold/weld the front fraim rail and shock tower assembly on, then i gotta cut the drivers side off and weld the new one on. should have it finished in a day or two, then i'll start on the drivers side floorpan in the rear.
then i gotta tackle the trunk, only a few spots on flat areas, but anyway today when i was welding the floorboard i lit the heater hoses on fire lol.. i'll have some more pictures up tomorrow or so
then i gotta tackle the trunk, only a few spots on flat areas, but anyway today when i was welding the floorboard i lit the heater hoses on fire lol.. i'll have some more pictures up tomorrow or so
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
Oct 5, 2015 07:16 AM
DreadPirateRoberts
V6 (1994-2004) Mustangs
4
Sep 26, 2015 02:11 PM
uberstang1
Classic Mustangs (Tech)
6
Sep 20, 2015 06:42 PM
tj@steeda
Archive - Mustangs For Sale
0
Sep 17, 2015 07:32 PM
