couple of small revs
Thread Starter
5th Gear Member
Joined: Jun 2005
Posts: 2,258
From: So. California
couple of small revs
new motor so i didnt want to rev real hard. http://videos.streetfire.net/video/14a366cc-0ad9-4805-9d58-99f8015587de.htm
also do you guys have any cool ideas for a tac? i need one and i kinda like this setup
[IMG]local://upfiles/18218/40254612B3E14025A07C01240853F8AC.jpg[/IMG]
also do you guys have any cool ideas for a tac? i need one and i kinda like this setup
[IMG]local://upfiles/18218/40254612B3E14025A07C01240853F8AC.jpg[/IMG]
D.R. THE PATHETIC DORK
Joined: Jun 2007
Posts: 30,871
From: West Virginia
RE: couple of small revs
0hhhhhh come on!!! give her a little more !!!!! she'll go or blow.......here like this!!!:
http://s242.photobucket.com/albums/ff63/mjr46/?action=view¤t=DSCN1157.flv
http://s242.photobucket.com/albums/ff63/mjr46/?action=view¤t=DSCN1157.flv
Thread Starter
5th Gear Member
Joined: Jun 2005
Posts: 2,258
From: So. California
RE: couple of small revs
here is this better??
http://videos.streetfire.net/video/f36c698b-0c0f-4373-bf06-99f80162eafd.htm
http://videos.streetfire.net/video/f36c698b-0c0f-4373-bf06-99f80162eafd.htm
6th Gear Member
Joined: Apr 2007
Posts: 10,468
From: California
RE: couple of small revs
If the engine is new, you're gonna need to take it out and drive it a bit hard, some WOT bursts to make sure the rings seat properly. Just make sure you break the cam in FIRST if it's a flat tappet.
5th Gear Member
Joined: Feb 2007
Posts: 2,688
From: Ramona, CA
RE: couple of small revs
ORIGINAL: eZ
its a roller block. 300hp crate motor from summit. edelbrock rpm intake, 650 edel. carb, headers, AOD, and 9' detroit locker w/ 4.10s
its a roller block. 300hp crate motor from summit. edelbrock rpm intake, 650 edel. carb, headers, AOD, and 9' detroit locker w/ 4.10s
Mmmmmmmm,,, Roller block... [sm=drooldude.gif]