How far in should the quarters betucked inthe wheel well area?? i keep worrying that i got them in to far when i installed my rear quarters am i ok here?

[IMG]local://upfiles/43944/BC242FBB888B4170993F65208D96847A.jpg[/IMG]

 

I can't really tell very well from the image. It appears to be in the correct location. Would an image taken in the same location on another car help? I can't get it at the moment because it's dark out but I could snag a pic in the morning on my way to work if it'll help?

 

I just wanted to know if the curve from the wheel area is supposes to stick out farther on the quarter

 

More light might help, I can't tell either!

 

measure from the axle flange on the other side to the wheel lip opening and compare might

 

I agree with rmoder65. Go with the other side of the caras a reference.

 

I can't tell......

 

+1

[IMG]local://upfiles/43944/FDC5300650BA47A989C3B5D18A54E352.jpg[/IMG]

 

+2

[IMG]local://upfiles/43944/D2797D25693B421F8CF7274105B6C0CC.jpg[/IMG]

 

I do all my measurements before cutting the old quarters off. Saves alot of guessing later. Just make sure whatever your measure is, it is equal on both sides.