HELP!!! Engine Problem
6th Gear Member
Joined: Oct 2006
Posts: 6,417
From: Cork, Ireland
RE: HELP!!! Engine Problem
LOL ... might as well really is a killer ...
i'm a bit late on this thread, but back when I was a mechanic ( I only ever worked on 4 cylinder cars) we turned the engine to 1st cylinder TDC, both valves closed. With a rug as a shielding we blew air into the hole the spark plug usually goes:
air coming out of carburator-> intake valve problem
air coming out of exhaust-> exhaust valve problem
air coming out of where you fill up the engine oil-> piston rings or piston problem
might have helped, maybe the next time.
I really feel sorry for you. there's nothing worse than trating an engine to a few niceties and as a thank you the whole thing dies.
Before you start troubleshooting anything else you're convinced for a week that you made a mistake somewhere ...
hate that
i'm a bit late on this thread, but back when I was a mechanic ( I only ever worked on 4 cylinder cars) we turned the engine to 1st cylinder TDC, both valves closed. With a rug as a shielding we blew air into the hole the spark plug usually goes:
air coming out of carburator-> intake valve problem
air coming out of exhaust-> exhaust valve problem
air coming out of where you fill up the engine oil-> piston rings or piston problem
might have helped, maybe the next time.
I really feel sorry for you. there's nothing worse than trating an engine to a few niceties and as a thank you the whole thing dies.
Before you start troubleshooting anything else you're convinced for a week that you made a mistake somewhere ...
hate that
Thread
Thread Starter
Forum
Replies
Last Post
ShaneB26154
4.6L (1996-2004 Modular) Mustang
35
Mar 4, 2021 04:05 AM
KEM Motorworks
5.0L (1979-1995) Mustang
20
Aug 14, 2015 10:13 PM
HIS S-197
4.0L V6 Technical Discussions
1
Aug 10, 2015 05:47 PM
