hello to all i have a question i have a 71 mustang and it has power steering but the old worm gearing do they make a rack and pinion setup for this year and if so who? Also i have a 8inch rear end and would like to buy a 9in any recomendations on were to buy one with a limited slip rear with 3.90 gears fully assembled to fit a 71. One more question is were can i find a good price on a nasa hood thanks to all who help and if your curious what the car looks like here is a pic

 

plenty of rack and pinion setups
plenty of opinions on which is best value for money etc.
Total Control Products (TCP) http://totalcontrolproducts.com/main.html
Revelation Racing Supplies (RRS) http://www.rrs-online.com.au/

as for buying a 9", depends where you are located. Ready to go like that will cost $$.
is the 8" shagged or you just feel the need for 9? Plenty of guys here swear by 8" unless you have a train load of torque.

 

the 8 is fine i thought about going 9 cause i built a 351cj stroked it and all sorts of good stuff im hoping to make around 450 to 500 at the wheels

 

oooh, nice

Currie Enterprises or pm Andrewmp6 - he has a good shop he deals with.

 

all those links were nice but they only went up to year 70 not for a 71

 

mmmm...good point.
I have a contact who is an agent for RRS...I will make some enquiries.

 

i cant find a R&P setup for a 71. only 70 and below.

 

any more help finding where to get the parts would be appricated

 

ya good luck! i have been looking for quite some time now! It might be a case if you want one you might need to make it yourself

 

lol ok i see that the venders havent realized that the 71-73 mustangs are becoming more popular and people are rebuilding them and want aftermarket parts oh wellhow hard is it to fabricate or get something close to fit a 71 for rack and pinion?