Name that part contest
May 17, 2005 | 02:06 PM
Thread Starter
Joined: Oct 2004
Posts: 17,565
From:
Name that part contest
Here is an aftermarket part for a vintage mustang. Can you name what it is, and what years of vintage mustang it will fit?
May 17, 2005 | 02:40 PM
Joined: Nov 2003
Posts: 38
From: United States
RE: Name that part contest
I believe it's a sequential tail light conversion board. Don't know for what year. I put them in my 68 and they work great. Much brighter than single 1157 and less current.
May 17, 2005 | 02:43 PM
Thread Starter
Joined: Oct 2004
Posts: 17,565
From:
RE: Name that part contest
Very close, but no cigar.
May 17, 2005 | 02:44 PM
Joined: Nov 2004
Posts: 135
From:
May 17, 2005 | 02:52 PM
Joined: Nov 2003
Posts: 38
From: United States
RE: Name that part contest
That's exactly what I used. However, Soaring's picture has 32 LEDs per group which probably dictates what year his is for.
May 17, 2005 | 03:19 PM
Joined: Nov 2004
Posts: 135
From:
RE: Name that part contest
w68fb, do you have these installed? I saw a video of them, and they seemed to speed up once you turned them on. That strayed me from purchasing them.
May 17, 2005 | 03:22 PM
Thread Starter
Joined: Oct 2004
Posts: 17,565
From:
RE: Name that part contest
I knew you guys would go straight to that, so I found an unusual one. Scratch your head some more.
May 17, 2005 | 03:57 PM
Thread Starter
Joined: Oct 2004
Posts: 17,565
From:
RE: Name that part contest
May 17, 2005 | 06:59 PM
Joined: Feb 2005
Posts: 120
RE: Name that part contest
It looks like just a LED conversion, not a sequential setup. I don't see an IC or transistors to control the blinking.
May 17, 2005 | 07:09 PM
Joined: Nov 2004
Posts: 135
From:
RE: Name that part contest
I agree with TBI. 65-66 non sequential LED tail's.
Name that part contest
