Carb vs EFI

Reply Subscribe

Thread Tools

Search this Thread

Mar 21, 2009 | 06:08 PM

1slow67

Thread Starter

ROTM Moderator

Joined: May 2007

Posts: 8,157

From: AL

I would go EFI.

Mar 21, 2009 | 08:39 PM

Scott H.

5th Gear Member

Joined: May 2005

Posts: 2,445

From:

Lot's of stuff you can use from the Fox

.....

Last edited by Scott H.; Jan 23, 2010 at 02:51 PM.

Mar 21, 2009 | 10:54 PM

rmodel65

Yukon Cornelius

Joined: Oct 2005

Posts: 11,812

From: deep in the heart of dixie GEORGIA

the drivers floor board was ripped? or somewhere else. the drivers floor is a very common problem on the foxes, esp with a bigger guy driving one

Mar 22, 2009 | 09:48 AM

JamesW

5th Gear Member

Joined: Sep 2006

Posts: 3,302

From: Northernish Eastish Central Texas

I have a few things on my website about efi swap. There's quite a few people here that have done it. If you decide to do the full monty, you'll have lots of help.

Mar 24, 2009 | 11:50 PM

vineman

2nd Gear Member

Joined: Jan 2008

Posts: 358

From:

I'm in the middle of an EFI swap and I cannot wait for it to be finished!

Mar 25, 2009 | 02:03 AM

guybored

2nd Gear Member

Joined: Aug 2007

Posts: 384

From: Texas

I am currently toing the same swapping in a 90 efi. I am changing from a 6 to a 8 and there are alot of things that I didn't plan think about. But defently going with efi.