Classic Mustangs (Tech) Technical discussions about the Mustangs of yester-year.

What would a 69' 429 engine be worth?

Thread Tools
 
Search this Thread
 
Old Sep 27, 2009 | 12:59 PM
  #1  
Piraya33's Avatar
Piraya33
Thread Starter
2nd Gear Member
 
Joined: Jul 2008
Posts: 230
From:
Default What would a 69' 429 engine be worth?

I can get a 429 out of a 69' mustang but I wanted to know what it was worth. I might get it to make a few bucks off of it. Thanks everyone!
Old Sep 27, 2009 | 02:25 PM
  #2  
THUMPIN455's Avatar
THUMPIN455
5th Gear Member
 
Joined: Mar 2005
Posts: 3,566
From: Marquette Mi
Default

Where are you located? I been thinking of dropping one in my 71.
Old Sep 27, 2009 | 03:13 PM
  #3  
4reboy's Avatar
4reboy
5th Gear Member
 
Joined: Jul 2006
Posts: 2,990
From: San Diego, CA
Default

a 429 or a 428? if it's a 429 out of a 69, wouldn't it be a BOSS car? unless someone previously put a regular 429 in it. But if it is a BOSS car buy that 69...
Old Sep 27, 2009 | 03:25 PM
  #4  
LynnBob Mustang's Avatar
LynnBob Mustang
5th Gear Member
 
Joined: Aug 2007
Posts: 2,243
From: PA
Default

The only 429 that came in '69 was the Boss 429. Unless that is what it is, your mistaken in what engine your looking at.

Lynn
Old Sep 27, 2009 | 03:28 PM
  #5  
badass84gt's Avatar
badass84gt
2nd Gear Member
 
Joined: Apr 2009
Posts: 193
From: Lewistown, Pa
Default

I was just offered a 69 boss 429 that needs gone through for $350. I dont think the guy knows what he hasbut the car its coming out of is a confirmed 69 Boss 429.
Old Sep 27, 2009 | 03:43 PM
  #6  
Piraya33's Avatar
Piraya33
Thread Starter
2nd Gear Member
 
Joined: Jul 2008
Posts: 230
From:
Default

Originally Posted by badass84gt
I was just offered a 69 boss 429 that needs gone through for $350. I dont think the guy knows what he hasbut the car its coming out of is a confirmed 69 Boss 429.
I would be all over that for $350. The guy I know wants $600.

The one I am looking at comes with DOVE-C heads c9ve-b. He said it is out of a 69' Mustang but it isn't a Boss block.
Old Sep 27, 2009 | 04:05 PM
  #7  
badass84gt's Avatar
badass84gt
2nd Gear Member
 
Joined: Apr 2009
Posts: 193
From: Lewistown, Pa
Default

It will be in my garage in a couple weeks. I plan on a complete rebuild and it will likely be going into my 83 coupe. It will be kept stock except for the cam and alil clean up porting on the heads.

Ive seen non Boss 429s in good running condition go for around $1000 and Boss 429s about $3000 when they are complete motors and all oringinal.
Old Sep 27, 2009 | 06:43 PM
  #8  
LynnBob Mustang's Avatar
LynnBob Mustang
5th Gear Member
 
Joined: Aug 2007
Posts: 2,243
From: PA
Default

Originally Posted by Piraya33
The one I am looking at comes with DOVE-C heads c9ve-b. He said it is out of a 69' Mustang but it isn't a Boss block.
That engine was never in a '69 Mustang stock from the factory. Someone may have put it a 429 from where those heads came from, but there was never a 429 motor, other then a Boss 429, in that year Mustang.

Here is what I got from a little Google search

"The Four Types of 429s
(Thanks to Dan Davis)

First was the base 429, known as the Thunder Jet (TJ). It came in T-birds and full size Fords in the late 60's and early 70's. Typically 360 horsepower. By far and away the most common -- they made 100,000+ of these. Can be ID'd be block casting numbers of C8SE, C9VE, D0VE, D1VE among others and head casting numbers of C8SE, C9VE, D0VE among others."
The site this from.
http://429mustangcougarinfo.50megs.com/components_3.htm

HTH and you can pass it on to the owner of the heads.

Lynn

Last edited by LynnBob Mustang; Sep 27, 2009 at 06:46 PM.
Old Sep 27, 2009 | 08:38 PM
  #9  
RedGTvert's Avatar
RedGTvert
1st Gear Member
 
Joined: Jun 2007
Posts: 132
From:
Default

Originally Posted by badass84gt
It will be in my garage in a couple weeks. I plan on a complete rebuild and it will likely be going into my 83 coupe. It will be kept stock except for the cam and alil clean up porting on the heads.

Ive seen non Boss 429s in good running condition go for around $1000 and Boss 429s about $3000 when they are complete motors and all oringinal.
Where have you seen any running B9 engine for $3K? Please show me.
Old Sep 27, 2009 | 09:55 PM
  #10  
dodgestang's Avatar
dodgestang
5th Gear Member
 
Joined: Nov 2004
Posts: 2,176
From: Insanity
Default

Originally Posted by Piraya33
I would be all over that for $350. The guy I know wants $600.

The one I am looking at comes with DOVE-C heads c9ve-b. He said it is out of a 69' Mustang but it isn't a Boss block.
Most likely it is originally out of a 69 t-bird.

Last edited by dodgestang; Sep 28, 2009 at 07:50 AM.



All times are GMT -5. The time now is 12:18 PM.