Alright, so I finally got the Water pump on the engine. I have the AC unit on, and the Power steering pump on. I have the Alternator Up where it should be but I cant tell how the bracket goes on. I finally have some pictures i can show y'all with. Im hoping to get the engine in tomorrow, or today, or maybe yesterday, whenever y'all look at this may vary. (April 17) Also hoping to start her tomorrow and planning on recording the first breath of life for all to see.

http://img94.imageshack.us/i/1001924h.jpg/
Front of engine with bracket, Idk how it goes. help?

http://img35.imageshack.us/i/1001925m.jpg/
Front of Engine So far without the bracket.

http://img8.imageshack.us/i/1001926s.jpg/
Side View.

 

Wish I could help but I could not find anything in the factory manual. I did find some pictures on the web and they all show that idler pulley on top of the engine over the top of the water pump so that the a/c belt runs past the waterpump pulley. I guess that the alternator adjuster would be the same as on my 67, it's a curved 1 1/4" wide part with a slot on 1 end and a hole on the other. It's about 8 to 10 inches long.