Hello guys,

this is a question from Munich, Germany.

I replaced all the tie rod ends, the idler arm and the drag link of my 64 1/2 Mustang.
But when I reassembled it, I couldn't remember if the drag link was in the front holes of the idler arm/pitman arm or if it was in the rear holes.

And I can't find any diagrams of the steering of a 64 on the internet as they are different from the 65 and 66 ones.

This is a picture of how I reassembled my steering:

http://yfrog.com/mwdsc00283nj

If anybody could tell me if this is right, I'd greatly appreciate it.

Chris

 

servus fuehrts euch gott!
i just had a quick look at mine and it looks the exact same way when i look from front at passenger side of car. either mine is wrong as well, or we're both good