Hi all, new member here from IN. Looking for some help with hooking up the dash to console harness feed to bring power to a console restoration im doing to my 65 convertible.

Looks like i have a blue and green male ends but have no idea of where to plug in. Obviously somewhere under the dash but have no idea of where to start.

Thanks in advance for your help.

 

I found an interior lighting diagram on another Mustang forum that shows the console to be plugged in to 2 female connectors. One is a blue/black wire the other is a green/yellow wire. My console was in the trunk when I bought the car(66 coupe) but there are both of these wires with female connectors coming down from under the dash just laying on the transmission hump. Hope this helps. I'll try to insert the link.http://hammar.dyndns.org/~djhamma/wiring.htm

 

My console is missing all its wiring so probably the blue wire goes to the blue/black and the green goes to the green/yellow.

 

Thanks, the schematics are very helpful. It looks like i need to be looking over near the glove box light.

 

There was no carpet in my car when I bought it so these wires are coming out from behind the firewall insulation and laying on the transmission hump. It looks like they come out from the top of the insulation and goes into the main wiring harness.