seat
#2
RE: seat
First off, pitch the Chilton's in the trash. It's not worth the paper it's printed on. Check eBay for a set of factory manuals.
Now. For the base, just grab the front edge and pull firmly up. It pops right out. Now look under the lower edge of the seat back in each corner. You'll see a bolt head in each corner, but they're kind of hidden under the bottom edge of the back. Unscrew the two bolts and pull down on the seat back. It will come out of the rail at the top. Installation is the same but reversed. Getting the bolts back in the holes is tricky, just be patient.
Now. For the base, just grab the front edge and pull firmly up. It pops right out. Now look under the lower edge of the seat back in each corner. You'll see a bolt head in each corner, but they're kind of hidden under the bottom edge of the back. Unscrew the two bolts and pull down on the seat back. It will come out of the rail at the top. Installation is the same but reversed. Getting the bolts back in the holes is tricky, just be patient.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
GT350 S550 Tech
1
09-29-2015 03:29 PM