Convertible Tech This section is only for questions or information relating to a convertible. Questions about drivetrain modifications should still be posted in the engine specific sections.

Top stopped working yesterday

Thread Tools
 
Search this Thread
 
Old Sep 24, 2015 | 12:43 PM
  #1  
jc409's Avatar
jc409
Thread Starter
 
Joined: Sep 2015
Posts: 6
From: FL
Default Top stopped working yesterday

I have a 1992 LX convertible. I've owned this car for 11 years. About 6 years ago I had the top motor rebuilt and I changed the fluids....been working fine since then. Yesterday I went to put up the top and it wouldn't work. I can hear the relays clicking so I know I have power to there. Have checked all the fuses. I replaced the relays today....nothing changed just clicking. Motor is not leaking fluid. The only thing I noticed was one of the rubber mounts for the motor is missing....not sure if that matters. I have never had to raise the parking brake handle to get the top to move but I tried that and still nothing.
Any suggestions would be appreciated. Jim
Old Sep 24, 2015 | 03:38 PM
  #2  
jc409's Avatar
jc409
Thread Starter
 
Joined: Sep 2015
Posts: 6
From: FL
Default

Further to my previous comments I have read in the forums that there is a breaker located under the dash. I looked for it but could not locate. I found a large bundle of wires all grouped together with two 30 amp fuses coming from the bundle. I checked these fuses and they are ok as well.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djbigskrilla
2005-2014 Mustangs
24
Sep 20, 2022 01:04 AM
importsmasher
V6 (1994-2004) Mustangs
4
Oct 9, 2015 04:42 PM
m4xx
4.6L (1996-2004 Modular) Mustang
6
Sep 1, 2015 06:46 PM
Calizic
4.6L (1996-2004 Modular) Mustang
5
Aug 28, 2015 01:46 PM
HIS S-197
4.0L V6 Technical Discussions
1
Aug 10, 2015 05:47 PM




All times are GMT -5. The time now is 02:15 AM.