Hey guys im electrically retarted.[8D]

I got white faced el glows w/ an inverter a while ago and now i want to install them. It has a Red wire (+) and a black wire(-) where do i hook up those two wires?

Ya see i also installing a few autometer gauges and they have a white wire (which runs to the fuse box) and a black wire (that runs to a good engine ground).

could i run the blacks together and the red and whites together[&:]?

I need all the info i can get. so anyone who has installed any of these gauges pls. help me I dont want to pay big buck to get these installed[:'(]

 

well the glow gauges should go to the light switch and you have to find out which wire is for the driving lights and splice in to that. BUT... u dont have too i didnt mine are hard wired in meaning they are on whenever there is power to the car i like it like that so when its dusk i dont need my lights on but i can still see my dash in the tinted car. ur whitefaces are easy to wire but install is a pain just takes time and for the autometer im not really sure i kno you could run the blacks together but i woulndt run the red and the white together hope this helps