I PI Swapped my 98 Mustang GT and have other bolt ons. I have an upgraded MAF and was thinking about putting on 24 or 32lb fuel injectors and having it calibrated for them. Which am i better off with the 24 or 32?
my car:
98 mustang gt, 4r70w automatic (pi swapped)
JLT Ram air cai
Pro-M 85MM Maf
FRPP 70mm Throttle body
BBK Intake plenum
Steeda UDPs
MSD Ignition coils/FRPP 9mm Wires
Mac off road h pipe
Flowmaster super 40 catback
Mac mid pipes
Trans-go shift kit
3.73 gears
diablosport predator tune

 

I'd say 24#ers tops. I think 19#ers can support up to 300 HP, maybe a bit more.

 

i say 32 you no you will install more parts on and that you will not have to rebuy injecters

 

What's wrong with the current MAF that you need to change it now? Unless you're running ~300hp, your stock 19'ers will hold out fine. There's a good possiblility that you'll be drowning your engine with those huge injectors right now

 

24's are adequate and ideal for your purpose. No need for 32's, unless you considering a blower in the future.

 

What benefit would i see from moving to 24lb injectors with my current setup?