Control Arms
#1
Control Arms
Now I've been having some trouble hooking my stang up on the street...
I'm thinking about getting Upper and lower control arms before I run her at the track.
I want to know how much this will improve my strait line preformance...
And I'm also curious if you guys have had any experience with any of the following products... or have any reccomendations...
Also... aluminum or steel any benefits other than weight?
http://www.jdsperformance.com/index....&initemuid=298
http://www.steeda.com/store/-catalog...rrearcarms.htm
http://www.steeda.com/store/-catalog...ontrolArms.htm
http://www.steeda.com/store/-catalog...rrearcarms.htm
http://www.maximummotorsports.com/rlca.asp
Thanks
Rob
I'm thinking about getting Upper and lower control arms before I run her at the track.
I want to know how much this will improve my strait line preformance...
And I'm also curious if you guys have had any experience with any of the following products... or have any reccomendations...
Also... aluminum or steel any benefits other than weight?
http://www.jdsperformance.com/index....&initemuid=298
http://www.steeda.com/store/-catalog...rrearcarms.htm
http://www.steeda.com/store/-catalog...ontrolArms.htm
http://www.steeda.com/store/-catalog...rrearcarms.htm
http://www.maximummotorsports.com/rlca.asp
Thanks
Rob
#4
RE: Control Arms
JUST LOOK AT MY ****Z..
[IMG]local://upfiles/5822/07E49E69B6444936B33C39401C295A8E.jpg[/IMG]
[IMG]local://upfiles/5822/665C3725A71340068CC0374241AC93E8.jpg[/IMG]
[IMG]local://upfiles/5822/36D053F12AEC4332A837EAE1AF39EB31.jpg[/IMG]
[IMG]local://upfiles/5822/07E49E69B6444936B33C39401C295A8E.jpg[/IMG]
[IMG]local://upfiles/5822/665C3725A71340068CC0374241AC93E8.jpg[/IMG]
[IMG]local://upfiles/5822/36D053F12AEC4332A837EAE1AF39EB31.jpg[/IMG]
#5
RE: Control Arms
Nosman... How much did this take off your 60' times??
How much difference are there between the lower control arms preformance wise?... steel, aluminum, adjustable??
Thanks
Rob
How much difference are there between the lower control arms preformance wise?... steel, aluminum, adjustable??
Thanks
Rob
Thread
Thread Starter
Forum
Replies
Last Post
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM