I found a set of MAC cc plates on ebay for like 140 bux. are these pretty good ones or should i be spending more than that? anybody recommend certain ones? thanks

Heres the link to the MACs:
http://cgi.ebay.com/ebaymotors/ws/eB...RK%3AMEWA%3AIT

[IMG]local://upfiles/12573/D36BE9DF2FC94718BE7AA7AEF5EBC5E6.jpg[/IMG]

 

I bought UPR, but if I had to do it over again - I'd get a set from maximummotorsports.com.

Ceyko

 

Are you happy with the UPRs? i saw those too for a little cheaper.

 

Yeah, I just did a Eibach Pro-kit and bought them "just in case" they were needed. If I were to do anything drastic with my suspension and do racing...I'd use the MM products. Just to ensure a good FE alignment, the UPRs are fine.

Ceyko

 

The best are from Maximum Motorsports they offer a warranty and they are the best quality.
I highly recommend MM's. They really know there suspension stuff.

Matt

 

MM plates are expensive!!! Do you think i could get by with the MACs?

 

I just installed a set of Mac C/C plates Friday. The quality was mid-level but acceptable. They were easy to install....about 1.5 hours total by myself.

 

Alright. Thanks guys, ill probably go with the MAC ones. im trying not to spend too much money.

 

Anything defintely better then stock. Have fun.

 

mac products will work.

Matt