EGR Valve Replacement
10-14-2007, 01:14 PM
#1
1st Gear Member
Thread Starter
Join Date: Feb 2007
Location:
Posts: 107
EGR Valve Replacement
My service engine light is on.
The guys at my local Autozone said it was my EGR Valve that needed either cleaning or replacing.
Could anyone either tell me how to do it step by step or link me to some instructions? Thanks, it would be a big help.
The guys at my local Autozone said it was my EGR Valve that needed either cleaning or replacing.
Could anyone either tell me how to do it step by step or link me to some instructions? Thanks, it would be a big help.
10-15-2007, 10:36 PM
#3
5th Gear Member
Join Date: Jun 2007
Location: NC
Posts: 2,112
RE: EGR Valve Replacement
Use a open ended wrench or cresent wrech to lossed the nut that holds the pipe to the EGR. Disconnect any vacuum or electrical hook-ups. Use a socket (10mm?) to lossen the bolts that hold it down. Remove the EGR, careful claen out any carbon. Clean out the port on the intake manifold, as well as the pipe running back to exahsut manifold. Post this question in teh 6cyl. section. They might expalin better, I am not familiar with '02.
Thread
Thread Starter
Forum
Replies
Last Post
TfcCDR
V6 (1994-2004) Mustangs
1
09-14-2015 12:08 PM
zanemoseley
2005-2014 Mustangs
6
09-06-2015 12:58 PM
