i ordered my slp loudmouth on monday, it came today (friday). the installation was going fairly smooth, had the car up on jacks and the exhaust unbolted and all the hangers off, but when i went to cut the back part off, i found out pretty fast that a hack saw wont get the job done. I guess im to used to working on hondas. anyhow, i just want to know what you guys who did it yourself used to cut the back half? any USEFUL post would be muchly appreciated. Thanks

 

I used a cutting wheel for mine. A hacksaw will work. But it takes time. Could try a sawsall as well. torches i have used on other mustang also. Good luck!

 

i have used a sawzall...what ever the name of it is...its a powered hack saw...its great..just have to be careful because i did once break the blade off because i didn't have it tight enough

 

I used a hack saw on one side, just have to man-handle that saw. I used a sawzall on the other side (got lazy).

Either works.

 

oxy-setline torch

 

Sawzall worked good. Takes a little time.

 

A sawzall is mans best friend that will cut anything fast shouldnt take any time!