General Tech Ask model specific questions in the appropriate category below. All other general questions within.

burning oil in 2v 4.6

Thread Tools
 
Search this Thread
 
Old Jun 12, 2009 | 11:09 PM
  #1  
tobyf's Avatar
tobyf
Thread Starter
 
Joined: Jun 2009
Posts: 29
From: Michigan
Exclamation burning oil in 2v 4.6

the thread name says it all.. maybe the valve seals???? 115,000 miles THANKS!
Old Jun 15, 2009 | 09:39 AM
  #2  
Blackgt2000's Avatar
Blackgt2000
 
Joined: Jun 2009
Posts: 9
From: Illinois
Default

i wouldnt mess with the valves just yet, i would get a tune up some new spark plugs and wires and see what that does for you. if you want good spark plugs go on americanmuscle.com and they have zex spark plugs i have them in my car and there awsome.
Old Jun 17, 2009 | 05:29 PM
  #3  
tobyf's Avatar
tobyf
Thread Starter
 
Joined: Jun 2009
Posts: 29
From: Michigan
Default

yeah i think it may be time to get some plugs and wires anyway. but the valve seals maybe gettin wore and thats a lot cheaper than the valves. i'm keepin an eye on the oil level for a while and then goin to look into the seals in a month or so. thanks for the input
Old Jun 17, 2009 | 07:49 PM
  #4  
Obsequious1's Avatar
Obsequious1
5th Gear Member
 
Joined: Feb 2008
Posts: 2,801
From: Greenlane, Pa.
Default

I don't recall the 2002 mustang using spark plug wires. Try flushing the system with sea foam. Use it in your oil, gas tank and run 1/3 of it into your intake through a vacuum line on the plenum. Maybe new plugs too if their olddddddd.
Old Jun 18, 2009 | 12:36 AM
  #5  
gunpig0313's Avatar
gunpig0313
3rd Gear Member
 
Joined: Apr 2009
Posts: 499
From: Oceanside CA
Default

The car doesn't have plug wires. They have individual coils packs that sit on top the plugs. How much oil do you burn in a week?
Old Jun 21, 2009 | 01:20 AM
  #6  
Jfsram's Avatar
Jfsram
4th Gear Member
 
Joined: Jan 2007
Posts: 1,999
From:
Default

Valve seals were definately a problem in the early non PI 4.6L Thunderbirds. I had one and also noticed 4.6L Crown Vics smoking just like my 95 Tbird.
Old Jun 21, 2009 | 01:15 PM
  #7  
mrxr250rider's Avatar
mrxr250rider
3rd Gear Member
 
Joined: Jan 2007
Posts: 613
From: pa
Default

my 96 gt was burning oil id burn about 3 quarts or so before my next oil change.

i changed my oil to pennzoil platinum and ran a bottle of lucas oil stabilizer and after that i lost another quart and i added another bottle of lucas and my low oil light hasnt come on since.

i suggest changing your oil and running a quart or two of lucas oil stabilizer.
Old Jun 22, 2009 | 05:23 PM
  #8  
Lowtryx's Avatar
Lowtryx
2nd Gear Member
 
Joined: Aug 2007
Posts: 175
From: Canada
Default

My 96 Burned oil while it was cold (If driven hard) and also, I'd notice if I would sit and idle extendedly then reverse quickly, the oil would quickly burn off.
I completed the PI swap, turns out it was the Valve guides. Quite worn.
Old Jun 22, 2009 | 06:12 PM
  #9  
tobyf's Avatar
tobyf
Thread Starter
 
Joined: Jun 2009
Posts: 29
From: Michigan
Default

hey everyone thanks! it isnt burning a lot but it was 2 quarts low after the half way point(in between oil changes) i think the plugs are the original ones. so i might look into somthin that works better with nitrous but thats goin to be later on in the year or next spring. i am new to the sight and love the feeback i've gotten and appreciate all the feedback.
Old Jun 23, 2009 | 08:21 AM
  #10  
mudvayne1's Avatar
mudvayne1
3rd Gear Member
 
Joined: Mar 2007
Posts: 657
From:
Default

Yeah that is smart. Run nitrous while your car is burning oil.



All times are GMT -5. The time now is 03:15 PM.