MustangForums.com

MustangForums.com (https://mustangforums.com/forum/index.php)
-   General Tech (https://mustangforums.com/forum/general-tech-6/)
-   -   Ball Joints? (https://mustangforums.com/forum/general-tech/616889-ball-joints.html)

05stang2010 09-14-2010 09:48 AM

Ball Joints?
 
Hey guys new to the tread. Okay here's the scenario. Got to the Tire shop were I purchased my tire's and had them take a look at a tire that had a nail in it then had them rotate all of them. The nail was only in the tread thank god. Mech, came back and said I had a loose ball joint on the driver side. Told me the bill Here's what it looked like:

Ball Joint 89.99
labor 89.00
alignment 70.00

total around 250 plus tax

Is this to insane or what?

I drove to work which is only 5 miles at the most and now it's pulling to the left a little bit, I think the kinda screwed up on the alignment. What say you guys. New to modding, replaced headlight,foglights,taillights and dome light first car that actually has A/C. :)

67mustang302 09-14-2010 01:17 PM

$90 for a ball joint? Is it made out of gold?

USMC1775 09-14-2010 11:52 PM

You got ripped bud. Steeda steel balljoints are ~100$ for both and can be knocked out by a novice in an afternoon, and if you paid for an alignment, they will probably(should) stand by their work and correct it. Did you tell them it stull pulling?

petrock 09-15-2010 11:31 PM

Moog lower ball joint (p/n K500033) is only $42.79 from rockauto.com.

05stang2010 09-16-2010 12:54 AM

USMC1775,

Hey Thanks for the information man. Yeah I didn't get them put in yet but the mech, said that they make them up fifty percent, of course it comes with a warranty. So if something goes wrong with it they'll fix it. Don't have the tools to do it or I would if I knew what I was doing. :) Oh I think they order Moog ball joints. Is their a difference between Moog and Steeda ball joints and if so what are they. Thanks again. Peace

05stang2010 09-16-2010 12:55 AM

If it was I would of sold it. :)

05stang2010 09-16-2010 01:00 AM


Originally Posted by 05stang2010 (Post 7199167)
Hey guys new to the tread. Okay here's the scenario. Got to the Tire shop were I purchased my tire's and had them take a look at a tire that had a nail in it then had them rotate all of them. The nail was only in the tread thank god. Mech, came back and said I had a loose ball joint on the driver side. Told me the bill Here's what it looked like:

Ball Joint 89.99 ( Comes with warranty too!) 50% mark up
labor 89.00
alignment 70.00

total around 250 plus tax ( Or Both for 379. )

Is this to insane or what?

I drove to work which is only 5 miles at the most and now it's pulling to the left a little bit, I think the kinda screwed up on the alignment. What say you guys. New to modding, replaced headlight,foglights,taillights and dome light first car that actually has A/C. :)

P.S. I went in yesterday to ask them if they could give me a break on doing both of them and they said they would do it for 379. instead of 500 bucks a piece.

05stang2010 09-16-2010 01:03 AM

Yeah I found one for 43.00 on ebay Raybestos or something. :) I went back in to bargain with the price too but they mark it up fifty percent b/c they add a warranty with it. So if something goes wrong with it they'll fix it. Peace thanks for the information too.

67mustang302 09-16-2010 02:21 PM

Get good ball joints. If you have a cheapo and it fails your car WILL leave the roadway. A totaled car or dying isn't worth saving a few bucks.

ufstang 09-17-2010 07:07 PM

I replaced my balljoints with the ones from steeda in about 6 hours. You can rent the tools from most places like advance auto or autozone, and get yourself a Haynes manual. Its really not that hard to do.


All times are GMT -5. The time now is 11:10 AM.


© 2024 MH Sub I, LLC dba Internet Brands