mtoepfer67

okay so i started out wanting a 428 but moved on to the 460 and shorehorning it in to the car.

so i'm thinking i'm gunna run a 390 suspension and put aluminium heads and intake on the motor as well as move the battery to the trunk and i should be able to make the 460 weigh close to the 390 stock block.

however i was wondering how to beef up the frame/unibody and how to cut more weight from the frount end. also if anyone could provide me the link to or give me some ideas on how and where to cut the holes to change the spark plugs and tips and tricks on ether how to make my own motor mounts or buy some.


awesome and one last thing the headers everyone always talks about the headers that you need to do this where do i find those and what am i looking for... thanks for all the help guys, and i'm always intrested to hear what yall have done or would do to make this easier tips tricks and helpful hints are always a plus

and yea a 351w would be easier but easy isn't fun hahah besides i'm hoping with the heads i'm gunna use and everything else i should be at a easy 750-800hp