hogstang

Took 98 mustang in to have windows tinted - back window top portion came out horribly.
Was told that tinting doesn't stick too well to the stang's back window top because of the
black dotted part. Has anyone else had this problem? They tried to elmers glue it but now
they say they want to take the tinting up to that part and then place a black plasitc strip
across that part. What do you think?

Chopper

I had mine done and the tint stuck and still sticks very well.Make them do it over or remove it and go to someone that can do the job properly.Don't pay for poorly done work either.

2k1gt

Mine is tinted over the dot matrix and it is still sticking perfectly after over a year.

moosedan

It all depends on the tinter. With good tint places, they take sand paper and water and smooth those dots out. Otherwise, it won't stick well and if you ride with your windows down, you'll find that out. that's the different. The tinter.

take it back and have them do that. it's more work. or, get some black out and put on it. You don't need the black dots!

xkon

my tinting stays perfectly fine up top, but if u look at it from the outside where the black dots are, it doesnt looks like its tinted in all the spots

*Blk_96_Stang_GT*

How much did it cost to get it tinted?

ekthrilla

how much are all of yalls tint jobs? down here where im at, it cost 100$ for a stangs tent (professionally done) and an extra 10$ for the strip across the front window.

sprostang

My tint was $220. All windows + the windshield visor. Its also guaranteed for life.

2k1gt

$150 for windows in 35% with an extra $15 for the 5% windshield strip.

gt96stang

Mine looks like that as well and I'm pissed at the people that did my tint.

My tint cost me 180 total with a lifetime guarantee