Re-bore and supercharge question
#1
Re-bore and supercharge question
Ok I've come to two realisations this week.
1. The new camaro ss will have a 0-60 of 4.6
2. I can't afford a 2011 Mustang and keep my 08.
Because of this I've decided to extensivly mod my current gt to the point where peformance of my car will be much better than both.
My plan is to bore my engine to either 5.4 or 5.0 then supercharge it with a roushcharger but don't know if its possible so that's my 1st question is it possible to bore my engine then supercharge it.
My next question is how can I improve handling on the track only thing I know about this is shocks, coil overs and sway bars. What can I do to get the most out of my car handling wise?
1. The new camaro ss will have a 0-60 of 4.6
2. I can't afford a 2011 Mustang and keep my 08.
Because of this I've decided to extensivly mod my current gt to the point where peformance of my car will be much better than both.
My plan is to bore my engine to either 5.4 or 5.0 then supercharge it with a roushcharger but don't know if its possible so that's my 1st question is it possible to bore my engine then supercharge it.
My next question is how can I improve handling on the track only thing I know about this is shocks, coil overs and sway bars. What can I do to get the most out of my car handling wise?
#2
get a livernois 298 stroker motor = roughly 5.0 liter. Put a supercharger up and turn the boost to whatver you want.
http://www.livernoismotorsports.com/...t.phtml?p=1551
And im guessing you mean the new roushcharger tvs and not the old one?
http://www.livernoismotorsports.com/...t.phtml?p=1551
And im guessing you mean the new roushcharger tvs and not the old one?
#7
Ok sorry for the misterming I won't be doing a engine swap to much of a nudge on budget. My 1st mods will be to the handling cause I wanna be able to control my car around the corner with my foot still on the throttle I wanna finish the project by next summer with stroking and supercharging done probably last. I've also been doing some design on my pc for custom window louvers and and interior to make it really stick out.