Updated: FRPP Cams Installed, Dyno Sheet inside + Youtube Vid
2 Attachment(s)
Made 332HP with 350TQ, not sure really how to do the math but thats what I got. My original Dyno sheet without the cams was like 297 for both. Anyways here it is. It was dark out but you really only need the sound. Skip to like 1:00min it was just waking up so you really cant hear the cams cause its too loud. Also after I drove it around the block, the Idle steadied at about 800 which was nice.....
http://www.youtube.com/watch?v=j75Q2FHdP0w |
very nice numbers and congrats
on getting cammed. |
Sounds great!
|
Love the sound and the numbers are decent. The A/F ratio is perfect!
|
My son woke up screaming so I figured I would get on here because Im pretty much an addict. I thought the numbers were good for now but I still want that blower. I thought I was going to not get that much torque but Im happy with it. I took that quick vid and it was late and didnt want people to think that I was crazy being outside. Anyways thanks for the replys.
|
I was going to also ask, does anyone think I could get a like a 285/40 in my wheel well or no? I just think I could go thinker and look better. Maybe 255/40 in the front, I have the sportlines so I dont know
|
285/40 will fit in the back and 255 or 265 in the front..... what size rim?
|
20 INCH, I wasnt sure so I stuck with the 30 series.
|
Yeah I have 285/30/20's in back and 265/30/20's in front. Next set of tires will be the Nitto Invo's or any company that makes 285/40/20's (maybe 275 if DR's) and 255/35/20 up front.....how much drop with the sportlines again?
|
Check Nitto's website for all the different sizes...looks like for the INVO's its 275/40/20 which is fine for more sidewall height. (28.62 tire height:eek:) which is quite tall....I cant drop mine so the more side wall height the better IMO. ;)
|
All times are GMT -5. The time now is 03:51 PM. |
© 2024 MH Sub I, LLC dba Internet Brands