MustangForums.com
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

MustangForums.com (https://mustangforums.com/forum/index.php)
-   GT S197 General Discussion (https://mustangforums.com/forum/gt-s197-general-discussion-49/)
-   -   Ford Racing 2.3 Whipple with new STEEDA 10 rib pully system (https://mustangforums.com/forum/gt-s197-general-discussion/585015-ford-racing-2-3-whipple-with-new-steeda-10-rib-pully-system.html)

Mach1Marauder 02-07-2010 05:44 PM
Originally Posted by moosestang (Post 6801149)
How do you get a 1.6 60 foot and not run 11's? Did he miss a shift?

I've never lost a belt, still stock tensioner.
Originally Posted by AmericanSpeed (Post 6801181)
Exactly what I was thinking, 1.6x is easily good for 11s.

I never lost a belt either with the stock tensioner and have dished out plenty of abuse. What size pulley was he running?
Ummmmmmmmmm............' Cause I wasn't driving!:icon_naughty:
I ran 11.69 N/A on a stock Longblock and stock tranny in my car and my "Street Tune".

I think he was running a 3.25 with stock BULLITT lower. I offered a different tensioner, but he wanted this set up.

moosestang 02-07-2010 06:30 PM
Originally Posted by AmericanSpeed (Post 6801181)
Exactly what I was thinking, 1.6x is easily good for 11s.

I never lost a belt either with the stock tensioner and have dished out plenty of abuse. What size pulley was he running?
Whoa! You've never broke a belt or bent a tensioner? I'm surprised, because power shifting seems to be the key to throwing a belt. Maybe some blowers are better aligned than others.

I want that steeda drive system. I just don't want to pay for it.

liberty911 02-11-2010 08:32 AM
That's a nice looking kit. The fact I would have to change out the hood killed the idea for me.

07 GT E UPP 02-12-2010 06:37 AM
Originally Posted by liberty911 (Post 6809800)
That's a nice looking kit. The fact I would have to change out the hood killed the idea for me.
Hey there Liberty, don't give-up so quickly.....!!! If you have a stock hood on your '06 GT you don't have to
replace it. It's just a minor modification to the inside of your hood. You just notch out a little piece of metal and you are " Good To Go ". :icon_smile:

10GTSTANG 02-12-2010 08:25 AM
I wonder if it wi;; clear the 10 hood?

mygt500 02-12-2010 09:28 AM
10GTSTANG- I think it does......and new motor mounts would give the clearance you need and stiffen up the whole drivetrain which IMO is essential with more power....never miss shifts either due to the fact the trans and motor stay aligned under all that TQ!

10GTSTANG 02-12-2010 10:29 AM
Originally Posted by mygt500 (Post 6812392)
10GTSTANG- I think it does......and new motor mounts would give the clearance you need and stiffen up the whole drivetrain which IMO is essential with more power....never miss shifts either due to the fact the trans and motor stay aligned under all that TQ!
Thanks dood, mounts are on my list too, for when my ship comes in!

Diabolical! 02-12-2010 04:38 PM
Prothane motor mounts made a world of difference on my car.

moosestang 02-14-2010 08:54 AM
Originally Posted by Diabolical! (Post 6813459)
Prothane motor mounts made a world of difference on my car.
I couldn't get used to the prothane mounts. Maybe I should have given them more time to grow on me.

onederful100 02-14-2010 07:32 PM
another option is the 8 rib kit. its about 1/2 the price of the steeda.
http://www.bggperformance.com/index....products_id=34


All times are GMT -5. The time now is 06:29 AM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands